High Accuracy Garden Soil PH Meter Humidity Tester
Item No.: HT5212
Desp.: Portable Soil PH and Moisture Tester
Specification:
PH Range:3-8 pH ;
PH Accuracy: +/- 0.3pH
Resolution: ± 0.2 pH
Moisture:1-8 (10%-80%)
Measurement accuracy : ± 1% RDG d +1
Measure Depth: 0-6 cm
Metal electrode length: 6.5cm
Operating Temperature: 5-50 ºC (41-122 Degrees Fahrenheit)
Features:
1. No battery required.
2. Accurate and easy to operate, economical and practical.
3. Moisture and PH value can be interchanged by pushing a white button.
4. A special mental probe which can increse 3 times of contact area and measure more accurately.
Packing: colour box
Product Size: 16*5cm
Pcs/ctn: 100
Ctn Size: 76*40*40cm
Weight/pc: 160g
Notes: Soil pH value is a very important factor for the quality of crops. Most of crops cannot survive in too acid or too alkaline soil. Get the right pH reading for your Crop is very important.
Usage:
1. Remove any obstruction to the soil that requires testng, such as surface soil, grass, leaves, pebbles, etc. If the soil is dry or contains too much fertilizer, sprinkle some water onto the soil and leave for 25-30 min before testing.
2. Before using the tester, be sure to thoroughly clean its metallic surface with a piece of whetting cloth. When using a brand- new tester, we advise you to insert it into the soil a few times before taking your reading. This is in order to remove any oily impurities from its metallic surface that may affect the accuracy of your soil pH or moisture reading.
3. Insert the meter directly into the soil that requires testing, embedding its metallic surface completely and tamping down the surrounding soil so that it adheres closely to the meter's metallic electrode surface.
About 10 min after inserting the in the soil, the pointer will indicate the correct value of pH or moisture.
The meter may sometimes register different values depending on the soil condition, adhesion to the meter's metalllic surface, moisture contene, etc. Therefore it is advised you take an average of several measurement.
4. Press the white button and the pointer will indicate the correct moisture value.
5. After use, wipe the plates clean of soil or moisture.
Notice:
1. If the measuring point of soil is too dry or overmuch fertilizer in it, fail to test the pH value, you should pour some water at that point and measure pH again after 28min.
2. Do not leave the metal part of the tester in the soil for too long (no longer than 1h), or it will damage the metallic surface.
3. Make sure the metallic surface is clean and dry before storing and using.
4. Do not use the tester near magnetic objects, and keep it away from other metallic objects.
5. Do not measure liquid. This tester is not designed for measuring liquid.
6. Do not hold the tester with fingers on metallic surface. Fingerprints are greasy and reduce the flow of current.
Use for: Agricultural field, Garden planters, lawn maintenance, greenhouse, vegetable produce, experimental research
Audited Supplier 
){kind=link}
){kind=link}