Animal Control LED Waterproof LED Outdoor Light Garden Ultrasonic Pond Solar Mole Repellent

• Pest Type: Mice
• Type: Solar Powered Battery Repellent
• Rechargeable: Non-Rechargeable
• Feature: Eco-Friendly
• Physical Form: Solid
• Mosquito Lamp: Rodents Snakes Ultrasonic Repellent
• Model NO.: HT5301
• Material: ABS
• Transport Package: Carton
• Trademark: ECOWIS
• Origin: China
• Production Capacity: 1000 Piece/Pieces Per Week

Product Description

Packing and shipping

Package
Ultrasonic Polka Dot Repellent Packing: Color Box + Carton
Port
Ningbo Port
Image example:

 

Lead time :

Quantity (s)	1 - 50000	> 50,000
Est. Time (days)	30	Will be negotiated

 

Ultrasonic Polka Dot Solar Repellent for Outdoor Garden Waterproof LED Light with Animal Control
 

Product description

Descriptions of the Ultrasonic Solar mole Repellent
 

Article name	Ultrasonic Solar mole repellent
Article No	HT5301
Material	ABS
Color	Dark green
Unit Dimensions	16 cm × 9 cm × 25 cm
Unit weight	80g
Power supply	4 × 1.2V Ni-CD rechargeable batteries
Energy consumption	Operation = 100mA, support <10uA
Ultrasonic frequency	400 ~ 1000 HZ
Coverage area	650 square meters
Package	Color box + cardboard
Shows	Available

 
 
 
Features : 
1 safe: No chemical poisons or environmentally friendly traps safe with pets and children
2. Power supply: long-lasting rechargeable battery or long-lasting ni-cad cell recharged with solar energy.
3. Material: durable ABS plastic and non-corrosive aluminum
4. Built-in rechargeable battery (included) ~ 1.2 v, 800 mAh Ni-cd
5. Transmitting ultrasonic waves every 30 seconds, rodent solar repellent is effective in an area of 650 square meters.
6 Frequency: 400Hz-1000Hz
7. To make the best use of the product, we strongly recommend an installation of 2 devices every 30 meters for the ground areas that rodents frequent.
 
Caution :
1. Allow the animal repellent to operate continuously for the best results.
2. Do not immerse repellent in water.
3. Do not cover the PIR sensor.
4. To clean the repellent, use a soft, damp cloth and mild soap with water. Do not use harsh chemicals or abrasive cleaning agents that can damage the repellent.
5. Do not install where the ground is frozen, irrigated or full of water. Dig a hole in the solid ground to place the device. The density of the soil will greatly affect the effectiveness of the device: the more solid the soil, the better the Mole and The Gopher Chaser will work.
 
Assemble and install :
1. Unpack the unit completely and confirm that all parts are present.
2 Connect the head repellent Polo sections connect part and play
3. Turn the power switch to "ON position position.
4 The repellent PIR is designed to be on the left continuously It uses 4 "AA" size Ni-CD rechargeable batteries.
5. Once lit, the LED light and the ultrasonic signal will be activated for 15 seconds. After this activation, the unit will move to standby mode.
6. The unit is ready for installation. The location should allow adequate sunlight to keep the batteries fully charged. Make sure the area that needs protection is within the effective range of the repellent.
7. For best results, keep the repellent head approximately 9-10 inches above the ground.
8. Be careful not to stress or break the repellent when installing it on hard ground. It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
9. When the PIR sensor detects movement, the LED will flash for 3 seconds and the ultrasonic signal will work for 15 seconds. After this, the repellent will return to standby mode.

Welcome to see more Control of animal repellent pests Products manufactured by China Huntop